401-LFPA-4.8中文資料WECO數(shù)據(jù)手冊PDF規(guī)格書

The combined tab/solder connector blocks are used primarily as connectors, cable

splitter or as a base in electrical appliances and in automotive.

In the -LF version of the Type 401 a solder connection is located on the opposite

side of the flat plug. The solder tags protrude approximately 8,5 mm from the

housing. On the solder tag a flat plug sleeve B 2.8 x 0.8 can be inserted.

Depending on the application, this type is available with flat connectors 4,8 mm or

6,3 mm width in 1 to 12 pole design.

The insulation on the plug side can be done with our insulating ISO 187 on the tab

4,8 mm and ISO 110 with the solder joints. The tab connectors are suitable for flat

plugs according to DIN 46247