6825482中文資料圖爾克數(shù)據(jù)手冊PDF規(guī)格書

The frequency transducer/pulse counter IM12-

FI01-2SF-2I-CPR/24VDC transmits frequency

signals up to 20,000 Hz electrically isolated.

In addition, the input signals can be monitored

for slip. The devices are suitable for operation

in zone 2.

Each channel of the 2-channel device is

equipped with an input for connecting sensors

in accordance with EN 60947-5-6 (NAMUR)

or potential-free contacts. On the output side,

a current output 0/4 … 20 mA is available for

each channel. The device can be powered

from a power bridge that also transmits a collective fault signal.

The device is parameterized via FDT and

IODD with a PC. The current output can be

set to 0/4…20 mA (source or sink optional). In

accordance with the parameterization (E1, E2,

E1-E2 or E2-E1), the input signals are provided as a 0/4…20 mA standard current signal.

The devices have a green power LED (Pwr)

and a red LED to indicate internal faults. For

each input circuit there is a yellow and a red

status LED. A fault in the input circuit leads to

a flashing red LED according to NE44 and an

internal fault to a steady read LED. The fault

current can be adjusted to 21.5

mA.

The device can be used in safety circuits up

to SIL2 (high and low demand according to

IEC 61508) and meets the requirements of

the NE21. It is equipped with removable screw

terminals.

The device is equipped with removable screw

terminals.

■ Input circuits monitored for wire-break and

short-circuit

■ Parameterized via PC

■ Complete galvanic isolation

■ Removable screw terminals

■ Power bridge (connector incl. in delivery)

■ ATEX use in Zone 2, cUL

■ SIL 2