6825482中文資料圖爾克數(shù)據(jù)手冊(cè)PDF規(guī)格書

The 2-channel temperature measuring amplifier IMX12-TI02-2TCURTDR-2I-CPR/24VDC/

CC has inputs for: Thermocouples acc. to IEC

60584, DIN 43710, GOST R 8.585-2001, low

voltages (-150…+150 mV), RTDs acc. to IEC

60751, DIN 43760, GOST 6651-94 (2, 3-wire)

and resistors 0…5 kò (2, 3-wire). The device

can be powered from a power bridge that also

transmits a collective fault signal.

The cold junction compensation can be set to

internal, external, or to a constant value. The

device is configured via the PC interface. The

current outputs can be set to 0/4 … 20 mA

and as source or sink.

A green LED indicates operational readiness.

A fault in the input circuit leads to a flashing

red LED according to NE44, an internal error

to a steady red LED. The fault current can be

adjusted to 21.5 mA

The device can be used in safety circuits up to

SIL2 (high and low demand according to IEC

61508) and meets the requirements of NE21.

It is equipped with removable spring type terminals.

The device can be used in safety circuits up to

SIL 2 (high and low demand according to IEC

61508) (hardware fault tolerance HFT = 0).

The device is equipped with removable

spring-type terminals.

■ Input circuits monitored for wire-break and

short-circuit

■ Parameterized via PC

■ Complete galvanic isolation

■ Input reverse-polarity protected

■ Removable spring type terminals

■ Power bridge (connector incl. in delivery)

■ ATEX, IECEx, cFM,cUL, NEPSI, INMETRO, Kosha, TR CU EAC CMI, TS

■ Installation in zone 2

■ SIL 2