74AHCT374D集成電路（IC）的觸發器規格書PDF中文資料

廠商型號	74AHCT374D
參數屬性	74AHCT374D 封裝/外殼為20-SOIC（0.295"，7.50mm 寬）；包裝為卷帶（TR）；類別為集成電路（IC）的觸發器；產品描述：IC FF D-TYPE SNGL 8BIT 20SO
功能描述	Octal D-type flip-flop; positive edge-trigger; 3-state
封裝外殼	20-SOIC（0.295"，7.50mm 寬）
文件大小	607.89 Kbytes
頁面數量	17 頁
生產廠商	Nexperia B.V. All rights reserved
企業簡稱	NEXPERIA【安世】
中文名稱	安世半導體(中國)有限公司官網
原廠標識
數據手冊	下載地址一下載地址二到原廠下載
更新時間	2025-2-22 22:59:00
人工找貨	74AHCT374D價格和庫存，歡迎聯系客服免費人工找貨

1. General description

The 74AHC374; 74AHCT374 is a high-speed Si-gate CMOS device and is pin compatible

with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard

No. 7-A.

The 74AHC374; 74AHCT374 comprises eight D-type flip-flops featuring separate D-type

inputs for each flip-flop and 3-state outputs for bus oriented applications. A clock input

(CP) and an output enable input (OE) are common to all flip-flops.

The eight flip-flops will store the state of their individual D inputs that meet the set-up and

hold times requirements for the LOW-to-HIGH CP transition.

When OE is LOW the content of the eight flip-flops is available at the outputs. When OE is

HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does

not affect the state of the flip-flops.

2. Features

n Balanced propagation delays

n All inputs have Schmitt-trigger actions

n Inputs accept voltages higher than VCC

n Common 3-state output enable input

n Input levels:

u For 74AHC374: CMOS level

u For 74AHCT374: TTL level

n ESD protection:

u HBM EIA/JESD22-A114E exceeds 2000 V

u MM EIA/JESD22-A115-A exceeds 200 V

u CDM EIA/JESD22-C101C exceeds 1000 V

n Multiple package options

n Specified from -40 °C to +85 °C and from -40 °C to +125 °C