770-S104中文資料GLENAIR數(shù)據(jù)手冊PDF規(guī)格書

MATERIAL SELECTION GUIDE

High Performance Elastomer -75°C to +150°C. Semi-rigid high performance elastomer

combines excellent resistance to fuels, oils and solvents with superior performance at

extreme temperatures. Material meets the requirements of VG95343 Type 6, BSG 198-5-

DE, EN62329-102 and SAE AS5258 Type H. These boots are recommended for demanding

applications such as military vehicles and petrochemical exploration.

Zero Halogen Polyolefin -30°C to +135°C. Low Smoke Zero Halogen (LSZH) polyolefin

boots meet low smoke and toxicity requirements of shipboard, transit and aircraft systems.

Oxygen index greater than 30, smoke index less than 20, and toxicity index under 3 per

100 grams. Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG 198-

5-DF, EN62329-101 and SAE AS5258 Type G. Good resistance to oils, fuels and solvents.

PRE-COATED ADHESIVE SELECTION GUIDE

Low Smoke Zero halogen (LSZH) polyamide hot melt adhesive Coating. Bonds well

to a variety of substrates. Good creep resistance at elevated temperatures. Excellent

bond strength at low temperature. Good resistance to fuels and oils. -55°C to +125°C.

Compatible with Type 1 and Type 2 boot materials.

High Temperature Epoxy Adhesive Coating. Glenair’s highest performance pre-coated

adhesive. The material requires careful installation using trained operators. -75°C to 150°C.

Withstands prolonged high temperature immersion in fuels and oils. Excellent peel adhesion on a wide range of materials. Compatible with Type 1 boot material only.