8V19N492集成電路（IC）的時(shí)鐘發(fā)生器PLL頻率合成器規(guī)格書PDF中文資料

Description

The 8V19N492 is a fully integrated FemtoClock NG jitter

attenuator and clock synthesizer designed as a high-performance

clock solution for conditioning and frequency/phase management

of wireless base station radio equipment boards. The device is

optimized to deliver excellent phase noise performance as

required in GSM, WCDMA, LTE, and LTE-A radio board

implementations. The device supports JESD204B subclass 0 and

1 clocks.

A two-stage PLL architecture supports both jitter attenuation and

frequency multiplication. The first stage PLL is the jitter attenuator

and uses an external VCXO for best possible phase noise

characteristics. The second stage PLL locks on the VCXO-PLL

output signal and synthesizes the target frequency.

The device supports the clock generation of high-frequency clocks

from the selected VCO and low-frequency synchronization signals

(SYSREF). SYSREF signals are internally synchronized to the

clock signals. Delay functions exist for achieving alignment and

controlled phase delay between system reference and clock

signals and to align/delay individual output signals. The four

redundant inputs are monitored for activity. Four selectable clock

switching modes are provided to handle clock input failure

scenarios. Auto-lock, individually programmable output frequency

dividers, and phase adjustment capabilities are added for

flexibility.

The device is configured through a three-wire SPI interface and

reports lock and signal loss status in internal registers and via a

lock detect (LOCK) output. Internal status bit changes can also be

reported via the nINT output. The 8V19N492 is ideal for driving

converter circuits in wireless infrastructure, radar/imaging, and

instrumentation/medical applications. The device is a member of

the high-performance clock family from Renesas.

Features

? High-performance clock RF-PLL with support for JESD204B

? Optimized for low phase noise: -150dBc/Hz (800kHz offset;

245.76MHz clock)

? Integrated phase noise of 80fs RMS typical (12kHz–20MHz).

? Dual-PLL architecture

? 1st-PLL stage with external VCXO for clock jitter attenuation

? 2nd-PLL with internal FemtoClockNG PLL: 2949.12MHz

? Six output channels with a total of 16 outputs, organized in:

? Four JESD204B channels (device clock and SYSREF

output) with two, four and five outputs

? One clock channel with two outputs

? One VCXO output

? Configurable integer clock frequency dividers

? Supported clock output frequencies include: 2949.12, 1474.56,

983.04, 491.52, 245.76, and 122.88 MHz

? Low-power LVPECL/LVDS outputs support configurable signal

amplitude, DC and AC coupling and LVPECL, LVDS line

terminations techniques

? Phase delay circuits

? Clock phase delay with 256 steps of 339ps and a range of

0 to 86.466 ns

? Individual SYSREF phase delay with 8 steps of 169ps

? Additional individual SYSREF fine phase delay with 25ps

steps

? Global SYSREF signal delay with 256 steps of 339ps and a

range of 0 to 86.466 ns

? Redundant input clock architecture with two inputs and

? Input activity monitoring

? Manual and automatic, fault-triggered clock selection modes

? Priority controlled clock selection

? Digital holdover and hitless switching

? Differential inputs accept LVDS and LVPECL signals

? SYSREF generation modes include internal and external

trigger mode for JESD204B

? Supply voltage: 3.3V

? SPI and control I/O voltage: 1.8V/3.3V (Selectable)

? Package: 10 x 10 mm 88-VFQFPN

? Temperature range: -40°C to +105°C (Case)