9.30.273.031SLASH2300中文資料etc未分類制造商數(shù)據(jù)手冊PDF規(guī)格書

description

RAFIX control devices are defined at RAFI as modular elements, consisting of an actuating element, if necessary a coupling and an

individual contact or lighting unit.

Actuating elements (such as pushbuttons, emergency stop actuators, etc.) have the intended tactility, reset and function only when

assembled with the appropriate switching elements.

The emergency stop buttons correspond to IEC 60 947 and VDE 0113 Part 1. Thanks to a forcibly actuated mechanical motion

sequence, they are dupe-proof in accordance with DIN EN ISO 13850. In order to prevent unintentional actuation, a tactile feedback

must be overcome. The key switch locks into the pressed position.

The design of the actuator protects the emergency stop button from interlocking. This means that an initiated emergency stop

procedure cannot be interrupted by jamming objects.

Only use with the emergency stop switching element.

With the illuminated versions, only the arrows are illuminated.

special features

? Emergency stop with compact design

?Low installation depth 9.2 mm (PCB) or 27 mm (QC)

?Connection types: printed circuit board connection (PCB) or plug-in connection(QC)

?PCB switching elements minimize mounting errors

?Switching elements with silver contacts (max. 250 V/4 A) or gold contacts (max.35 V/100 mA)

? Degree of protection: IP 65 at the front

fields of application

? Measurement-control-regulation

? Electrical engineering

? Mechanical and system engineering

? Vehicle construction

? Handheld terminals

? Industrial robots