9070796中文資料德國泰邦數據手冊PDF規格書

Description

- Passive infra-red presence detector KNX for ceiling installation in false ceilings

- Square detection area 360°, 7 x 7 m, (49 m2) at mounting height 3 m

- 3 channels light and 2 channels presence

- Automatic presence- and brightness-dependent control for lighting and HVAC

- Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control.

- Manual alignment of the detection area (swivel mechanism)

- Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs

- 3 directed light measurements

- 2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor

- Switched or constant light control with 2 independent control systems and standby function (orientation light)

- Switching mode with dimmable lighting

- Fully or semi-automatic

- Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control

- Teach-in of the brightness switching value or the set point value

- Light time delay configurable

- Self-learning time delay can be set using parameters, object or via remote control

- Reduction of time delay when present briefly (short-term presence)

- Manual override by telegram or remote control

- 2 presence channels C4, C5, individually configurable

- Switch-on delay and time delay configurable

- Room monitoring with selective movement detection

- Setting the room correction factor for brightness measurement comparison

- Configurable sensitivity

- Extremely simple setting of the energy-saving ratio with the new ?eco plus? function

- Test mode for checking function and detection area

- Scenarios

- Parallel switching of multiple presence detectors (Master/Slave or Master/Master)

- Installation in false ceilings with springs

- Surface mounting on ceilings possible with the AP-frame (optional)

- User remote control ?theSenda S? (optional)

- Management remote control ?SendoPro? (optional)

- Installation remote control ?theSenda P? (optional)