AD2438中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

A2B BUS FEATURES

Line topology

Single main node, up to 16 subordinate nodes

Up to 15 m between nodes and up to 80 m overall cable

length

Communication over distance

Synchronous data

Multichannel I2S/TDM to I2S/TDM

Clock synchronous, phase-aligned in all nodes

Low latency subordinate-to-subordinate

communication

Control and status information I2C to I2C

GPIO over distance

Bus power or local power subordinate nodes

Configurable with SigmaStudio+ graphical software tool

AEC-Q100 qualified for automotive applications

BASELINE A2B TRANSCEIVER FEATURES

Configurable as A2B main or last subordinate nodes

Programmable via I2C interface

8-bit to 32-bit multichannel I2S/TDM interface

I2S/TDM/PDM programmable data rate

I2C mailbox

PDM inputs for 4 high dynamic range microphones on main

or subordinate nodes

Support for receiving I2S/TDM data on nodes with up to

4 PDM microphones

Unique ID register for each transceiver

Support for crossover or straight-through cabling

Programmable settings to optimize EMC performance

AD2430/AD2438 TRANSCEIVER ENHANCEMENTS

Cable diagnostics with integrated line power switches

Supports 3.3 V input at VIN in low voltage input (LVI) mode

for local powered subordinate node

Dedicated hardware reset pin

I2S/TDM crossbar switch

Flexible mapping of Tx/Rx TDM channel data to A2B slots

Support for I2C fast mode plus (1 MHz)

Support for in-cabin LED control using 4 PWM outputs

8 GPIO pins with configurable pin mapping

AUTOMOTIVE APPLICATIONS

Hands free/speech recognition

Microphone arrays

In-car telematics and emergency call systems

Overhead consoles

In-car communications