AD261BND-5隔離器的數字隔離器規格書PDF中文資料

AD261BND-5屬于隔離器的數字隔離器。由亞德諾半導體技術有限公司制造生產的AD261BND-5數字隔離器數字隔離器用于在電氣上隔離電路，但仍允許電路之間傳輸數字信號。技術類型包括容性耦合式、巨磁阻 (GMR) 式或磁耦合式。??通道數范圍為 1 至 10 個，通道類型可以是雙向、單向或二者組合。

GENERAL DESCRIPTION

The AD261 is designed to isolate five digital control signals to/from a microcontroller and its related field I/O components. Six models allow all I/O combinations from five input lines to five output lines, including combinations in between. Every AD261 effectively replaces up to five opto-isolators.

Each line of the AD261 has a bandwidth of 20 MHz (min) with a propagation delay of only 14 ns, which allows for extremely fast data transmission. Output waveform symmetry is maintained to within ±1 ns of the input so the AD261 can be used to accurately isolate time-based PWM signals.

All field or system output pins of the AD261 can be set to a high resistance three-state level by use of the two enable pins. A field output three-stated offers a convenient method of presetting logic levels at power-up by use of pull-up/down resistors. System side outputs being three-stated allows for easy multiplexing of multiple AD261s.

FEATURES

Isolation Test Voltage: To 3.5 kV rms

Five Isolated Logic Lines: Available in Six I/O Configurations

Logic Signal Bandwidth: 20 MHz (min)

CMV Transient Immunity: 10 kV/ms min

Waveform Edge Transmission Symmetry: 61 ns

Field and System Output Enable/Three-State Functions

Performance Rated Over –258C to +858C

UL1950, IEC950, EN60950 Certification (VDE, CE, Pending)

APPLICATIONS

PLC/DCS Analog Input and Output Cards

Communications Bus Isolation

General Data Acquisition Applications

IGBT Motor Drive Controls

High Speed Digital I/O Ports