AD7688集成電路（IC）的模數轉換器（ADC）規(guī)格書PDF中文資料

AD7688屬于集成電路（IC）的模數轉換器（ADC）。由亞德諾半導體技術有限公司制造生產的AD7688模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

GENERAL DESCRIPTION

The AD7688 is a 16-bit, charge redistribution, successive approximation, analog-to-digital converter (ADC) that operates from a single 5 V power supply, VDD. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversion clock, and a versatile serial interface port. The part also contains a low noise, wide bandwidth, short aperture delay track-and-hold circuit. On the CNV rising edge,

it samples the voltage difference between IN+ and IN? pins. The voltages on these pins usually swing in opposite phase between 0 V and REF. The reference voltage, REF, is applied externally and can be set up to the supply voltage.

FEATURES

16-bit resolution with no missing codes

Throughput: 500 kSPS

INL: ±0.4 LSB typ, ±1.5 LSB max (±23 ppm of FSR)

Dynamic range: 96.5 dB

SNR: 95.5 dB @ 20 kHz

THD: ?118 dB @ 20 kHz

True differential analog input range

±VREF

0 V to VREFwith VREFup to VDD on both inputs

No pipeline delay

Single-supply 5 V operation with

1.8 V/2.5 V/3 V/5 V logic interface

Serial interface SPI?/QSPI?/MICROWIRE?/DSP-compatible

Daisy-chain multiple ADCs and BUSY indicator

Power dissipation

3.75 mW @ 5 V/100 kSPS

3.75 μW @ 5 V/100 SPS

Standby current: 1 nA

10-lead MSOP (MSOP-8 size) and

3 mm × 3 mm QFN (LFCSP) (SOT-23 size)

Pin-for-pin compatible with AD7685, AD7686, and AD7687

APPLICATIONS

Battery-powered equipment

Data acquisitions

Instrumentation

Medical instruments

Process controls