AD9837ACPZ-RL7集成電路（IC）的直接數字合成（DDS）規格書PDF中文資料

AD9837ACPZ-RL7屬于集成電路（IC）的直接數字合成（DDS）。由亞德諾半導體技術有限公司制造生產的AD9837ACPZ-RL7直接數字合成（DDS）直接數字合成 (DDS) 用于由數字信號生成不同頻率的模擬波形。在必須大范圍掃描的無線系統中可用于頻率控制。主時鐘頻率有 5MHz、16MHz、16.776MHz、25MHz、50MHz、75MHz、125MHz、180MHz、200MHz、250MHz、300MHz、400MHz、500MHz、1GHz、2.5GHz 和 3GHz，分辨率為 10 b、12 b 或 14 b。

GENERAL DESCRIPTION

The AD9837 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications. The output frequency and phase are software programmable,

allowing easy tuning. The frequency registers are 28 bits wide: with a 16 MHz clock rate, resolution of 0.06 Hz can be achieved; with a 5 MHz clock rate, the AD9837 can be tuned to 0.02 Hz resolution.

FEATURES

Digitally programmable frequency and phase

8.5 mW power consumption at 2.3 V

MCLK speed: 16 MHz (B grade), 5 MHz (A grade)

28-bit resolution: 0.06 Hz at 16 MHz reference clock

Sinusoidal, triangular, and square wave outputs

2.3 V to 5.5 V power supply

3-wire SPI interface

Extended temperature range: ?40°C to +125°C

Power-down option

10-lead LFCSP

APPLICATIONS

Frequency stimulus/waveform generation

Liquid and gas flow measurement

Sensory applications: proximity, motion, and defect detection

Line loss/attenuation

Test and medical equipment

Sweep/clock generators

Time domain reflectometry (TDR) applications