ADM3053集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ADM3053屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的ADM3053驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

GENERAL DESCRIPTION

The ADM3053 is an isolated controller area network (CAN)

physical layer transceiver with an integrated isolated dc-to-dc converter. The ADM3053 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler? technology to combine a 2-channel isolator, a CAN transceiver, and Analog Devices isoPower? dc-to-dc converter into a single SOIC surface

mount package. An on-chip oscillator outputs a pair of square waveforms that drive an internal transformer to provide isolated power. The device is powered by a single 5 V supply realizing a

fully isolated CAN solution. The ADM3053 creates a fully isolated interface between the

CAN protocol controller and the physical layer bus. It is capable

of running at data rates of up to 1 Mbps. The device has current limiting and thermal shutdown features

to protect against output short circuits. The part is fully specified over the industrial temperature range and is available in a

20-lead, wide-body SOIC package. The ADM3053 contains isoPower technology that uses high frequency switching elements to transfer power through the

transformer. Special care must be taken during printed circuit

board (PCB) layout to meet emissions standards. Refer to the

AN-0971 Application Note, Recommendations for Control of Radiated Emissions with isoPower Devices, for details on board layout considerations.

FEATURES 2.5 kV rms signal and power isolated CAN transceiver isoPower integrated isolated dc-to-dc converter 5 V operation on VCC

5 V or 3.3 V operation on VIO

Complies with ISO 11898 standard High speed data rates of up to 1 Mbps

Unpowered nodes do not disturb the bus Connect 110 or more nodes on the bus Slope control for reduced EMI Thermal shutdown protection High common-mode transient immunity: >25 kV/μs

Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN EN 60747-5-2 (VDE 0884 Part 2): 2003-01 VIORM = 560 V peak Industrial operating temperature range (?40°C to +85°C) Available in wide-body, 20-lead SOIC package

APPLICATIONS

CAN data buses

Industrial field networks