ADSP-21MOD970-110中文資料亞德諾數(shù)據(jù)手冊(cè)PDF規(guī)格書

INTRODUCTION

The ADSP-21mod970-110 is a six-channel solution intended for remote access server and remote access concentrator applications. It combines a highly integrated DSP processor with downloadable software. All datapump and controller functions are implemented on a single 1.45-square-inch chip. This modem package allows the highest modem port density while achieving the lowest power consumption in a software upgradable platform.

FEATURES

High Density

Implements Six Modem Channels in One Package

304-Ball PBGA with a 1.45 Square Inch (961 sq. mm.)

Footprint

ISDN B-Channel HDLC

DATA Modulations

CCITT V.90 (30 kbps–56 kbps)

K56Flex? (30 kbps–56 kbps)

ITU-T V.34: 33600 Bits/s–2400 Bits/s

CCITT V.32bis: 14400 Bits/s–7200 Bits/s

CCITT V.32: 9600 Bits/s, 4800 Bits/s

CCITT V.23

CCITT V.22/V.22bis: 2400, 1200, 600 Bits/s

CCITT V.21: 300 Bits/s

Bell 212A: 1200 Bits/s

Bell 103: 300 Bits/s

Start-Up Procedures:

ITU-T V.8

Error Correction and Data Compression:

CCITT V.42 Error Correction (LAPM and MNP2-4)

CCITT V.42bis Data and MNP Class 5 Compression

FAX Modem

V.17/V.29/V.27ter/V.21 Channel 2

T.30 Protocol

V.120

V.110

PPP Asynchronous Framing Support (RFC 1662)

Low Power

80 mW per Channel Typical Active

Low Power and Sleep Modes

On-Chip DS0/DS1 Interface

Full Function DMA Port

No External Memory Required

3.3 V Supply

Fully Upgradable RAM-Based Architecture

Fast Download

Full Image in 5 ms

High Speed 16-Bit Port Link Bus Provides Simple

Interface Between Host and Modem Pool