ANX2433中文資料硅谷數模數據手冊PDF規格書

Features

eDP receiver

- Integrated high-speed DP-Rx compliant with DisplayPort standard eDP v1.4b

- Up to 2 lanes @2.7Gbps, 2.16Gbps, 2.43Gbps and 1.62Gbps

- Normal/Fast/No link training

- Support PSR1 function by MCP(multi chip package) DRAM die

- Supports DRRS/NvDPS/SDRRS functions

- Supports MBO

CEDS protocol, which supports the following:

- Up to 12-channels

- CEDS transmitter up to 2.0Gbps configuration

- Various swap modes: inter-port swap, intraport swap, p/n swap, RGB swap, odd/even

pixel swap, etc.

- Scan direction swap

- Supports VBPR function

- Supports Z-inversion(column inversion), and Nline inversion

- Programmable charger share control including disable

System IO functions with non-standard applications

- EDID access through AUX channel

- EDID and configuration content check-sum support

- On-chip filtered reset

- EEPROM shared for EDID and configuration power requirements

- On-chip SSCG (max. +/-1% with 0.25% step, 10/20/30/40 kHz, center spreading)

TCON functions supported:

- HD(1366x768), HD+(1600x900), FHD(1920x1080), 1920x1280

- eDP TCON color depth: 18/24bpp input, 18/24bpp output

- Gate D-IC/GIP timing through GPIO

- Power-up gate output masking to avoid DC/DC over-loading

- Programmable Fail Safe mode control

- Configurable BIST pattern

- 10-bit gamma correction table for each color

- FRC and various FRC pattern configurations

- PWM generator, PWM pass-through, and PWM product modes

- DELL DBC

- Adaptive sync, Direct drive G-sync support

No external crystal required

Reduced WWAN interference (SSC on LC clock and DDR)

UMC 55nm SP process

Power supply: 1.8V/1.0V (Internal 3.3V HPD)

BGA 80 (5x8), pitch 0.65mm

RoHS compliant and Halogen free package