ANX7430中文資料硅谷數模數據手冊PDF規(guī)格書

Features

Built-in re-timer

- Integrated re-timer for USB 3.1 up to Gen 2 @ 10Gbps

- Loss compensation to recover up to 23dB channel loss

Integrated mux

- Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector

- Mux control input through I2C commands from external I2C master (or, optionally through FLIP/OP_MODE pins)

Reference clock for re-timers

- Utilizes a 24MHz crystal or 1.05V swing singleended clock source

Serial and debug interfaces

- I2C Slave interface, up to 1MHz, for mux and retimer configuration

- DCI debug interface support

Industry standard compatibility

- USB 3.1 specification, Appendix E

- USB Type-C r1.2 specification

- Intel USB 3.1 Repeater and Active Switch specification

Low-power design

- Analog power supply at 1.8V

- Dedicated 3.3V power for DCI interface

- Dedicated supply power pin for I/O power at 1.8V

Packages

- BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch

- QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch

- QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch

Commercial temperature range of 0C to 70C

Applications

Notebooks, desktops, 2-in-1s, and docking stations