AZ5H33-01F.R7GR中文資料晶焱科技數(shù)據(jù)手冊(cè)PDF規(guī)格書

Features

ESD protection for one line with uni-direction

Provide transient protection for the protected

line to

IEC 61000-4-2 (ESD) ±20kV (air/contact)

IEC 61000-4-4 (EFT) 80A (5/50ns)

IEC 61000-4-5 (Lightning) 13A (8/20ms)

Ultra-low capacitance: 0.85pF typical

0402 small DFN package saves board space

High breakdown voltage to provide

Description

AZ5H33-01F is a design which includes a

uni-directional surge rated clamping cell to

protect high-speed data interfaces in an

electronic system. The AZ5H33-01F has been

specifically designed to protect sensitive

components which are connected to data and

transmission lines from over-voltage caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ5H33-01F is a unique design which includes

proprietary clamping cell in a single package.

During transient conditions, the proprietary

clamping cell prevents over-voltage on the data

lines, which is protecting any downstream

components.

AZ5H33-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).

over-voltage protection on USB 2.0 D+/D- pins

Fast turn-on and low clamping voltage

For low operating voltage applications: 3.3V

Solid-state silicon-avalanche and active circuit

triggering technology

Green part

Applications

USB 2.0

USB Type-C D+/D- pins

Handheld portable applications

Data and I/O lines protection

Analog input lines protection

Video lines protection

Description

AZ5H33-01F is a design which includes a

uni-directional surge rated clamping cell to

protect high-speed data interfaces in an

electronic system. The AZ5H33-01F has been

specifically designed to protect sensitive

components which are connected to data and

transmission lines from over-voltage caused by

Electrostatic Discharging (ESD), Electrical Fast

Transients (EFT), Lightning, and Cable

Discharge Event (CDE).

AZ5H33-01F is a unique design which includes

proprietary clamping cell in a single package.

During transient conditions, the proprietary

clamping cell prevents over-voltage on the data

lines, which is protecting any downstream

components.

AZ5H33-01F may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).