AZ6425-01G.R7G中文資料晶焱科技數據手冊PDF規格書

Features

ESD/Surge Protection for 1 Line with

Bi-directional

Provide ESD protection for each line to

IEC 61000-4-2 (ESD) ±30kV (air / contact)

IEC 61000-4-4 (EFT) 80A (5/50ns)

IEC 61000-4-5 (Lightning) 60A (8/20μs)

Suitable for, 2.5V and below, operating

voltage applications

Small package saves board space

Protect one I/O line or one power line

Fast turn-on and low clamping voltage

Solid-state silicon-avalanche and active circuit

triggering technology

Green Part

Applications

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Power management systems

Description

AZ6425-01G is a design which includes a

bi-directional surge rated clamping cell to protect

one power line, or one control line, or one low

speed data line in an electronic system. The

AZ6425-01G has been specifically designed to

protect sensitive components which are

connected to power and control lines from

over-voltage damage caused by Electrostatic

Discharging (ESD), Electrical Fast Transients

(EFT), Lightning, and Cable Discharge Event

(CDE).

AZ6425-01G is a unique design which

includes proprietary clamping cell in a single

package. During transient conditions, the

proprietary clamping cell prevents over-voltage

on the power line or control/data lines, protecting

any downstream components.

AZ6425-01G is bi-directional and may be

used on lines where the signal swings above and

below ground.

AZ6425-01G may be used to meet the ESD

immunity requirements of IEC 61000-4-2, Level 4

(±15kV air, ±8kV contact discharge).