BD49中文資料ETC數據手冊PDF規格書

Technical description

Floodlight designed to useWarm White LED lamps and lenses for flood distribution. The luminaire consists of an optical

assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium

alloy coated with liquid acrylic paint (colour: RAL 9007 grey) or textured liquid paint (colour: RAL 9016 white) with a high level of

resistance to atmospheric agents and UV rays. The 5 mm thick transparent, tempered sodium – calcium safety glass is joined to the

frame with silicone. The frame is fastened to the optical assembly by two M5 AISI 304 stainless steel captive screws and a

galvanised steel safety cable. The optical assembly contains the circuit complete with 16 LEDs and relative plastic lenses. The

component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a

galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the

product body with four M5 AISI 304 stainless steel captive screws and a safety cable. The luminaire is set up for pass-through wiring

using two M24x1.5 nickel–plated brass cable clamps, suitable for the entry of cables with diameter between 7.0 and 16.0 mm. The

connection between the mains and the control gear is made using a 3-pole terminal board with quick-coupling system. iPro can be

angled relative to the horizontal plane (+95°/ -5°) using an extruded aluminium bracket on which the graduated scale (15° steps) is

marked with serigraphy. The internal silicone seals guarantee watertightness IP66. Various accessories are available: visor,

directional flaps, glass refractors, glass prismatic diffusers and coloured filters which can be applied in pairs. All external screws used

are made of A2 stainless steel.