CC2340R52E0WRHBRQ1中文資料德州儀器數(shù)據(jù)手冊(cè)PDF規(guī)格書

1 Features

Wireless microcontroller

? AEC-Q100 Grade 2 qualified for Automotive

applications

? Optimized 48-MHz Arm? Cortex?-M0+ processor

? 512 KB of in-system programmable flash

? 12 KB of ROM for bootloader and drivers

? 36 KB of ultra-low leakage SRAM. Full RAM

retention in standby mode

? 2.4 GHz RF transceiver compatible with

Bluetooth? 5.3 Low Energy

? Integrated balun

? Supports over-the-air upgrade (OTA)

? Serial Wire Debug (SWD)

Low power consumption

? MCU consumption:

– 2.6 mA active mode, CoreMark?

– 53 μA/MHz running CoreMark?

– < 710 nA standby mode, RTC, 36 KB RAM

– 165 nA shutdown mode, wake-up on pin

? Radio Consumption:

– 5.3 mA RX

– 5.1 mA TX at 0 dBm

– < 11.0 mA TX at +8 dBm

Wireless protocol support

? Bluetooth? 5.3 Low Energy

High-performance radio

? -102 dBm for Bluetooth? Low Energy 125 kbps

? -96.5 dBm for Bluetooth? Low Energy 1 Mbps

? Output power up to +8 dBm with temperature

compensation

Regulatory compliance

? Suitable for systems targeting compliance with

these standards:

– EN 300 328 (Europe)

– FCC CFR47 Part 15

– ARIB STD-T66 (Japan)

MCU peripherals

? 19 I/O Pads

– 2 IO pads SWD, muxed with GPIOs

– 2 IO pads LFXT, muxed with GPIOs

– 15 DIOs (analog or digital IOs)

? 3 × 16-bit and 1× 24-bit general-purpose timers,

quadrature decode mode support

? 12-bit ADC, 1.2 Msps with external reference, 267

ksps with internal reference, 8 external ADC inputs

? 1× low power comparator

? 1× UART

? 1× SPI

? 1× I2C

? Real-time clock (RTC)

? Integrated temperature and battery monitor

? Watchdog timer

Security enablers

? AES 128-bit cryptographic accelerator

? Random number generator from on-chip analog

noise

Development tools and software

? LP-EM-CC2340R5 LaunchPad Development Kit

? SimpleLink? CC23xx Software Development Kit

(SDK)

? SmartRF? Studio for simple radio configuration

? SysConfig system configuration tool

Operating range

? On-chip buck DC/DC converter

? 1.71-V to 3.8-V single supply voltage

? Tj: -40 to +125°C

? HBM ESD Classification Level 2

? CDM ESD Classification Level C3

RoHS-compliant package

? 5-mm × 5-mm RHB QFN32 with wettable flanks

(19 GPIOs)

2 Applications

? Automotive

– Car access and security systems

? Passive entry passive start (PEPS)

? Remote keyless entry (RKE)

– Advanced driver assistance systems (ADAS)

– Tire pressure monitoring systems (TPMS)

3 Description

The SimpleLink? CC2340R5-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting

Bluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless communication

in applications such as tire pressure monitoring systems (TPMS), car access including key fogs used in passive

entry passive start (PEPS) and remote keyless entry (RKE), cable replacement, and smartphone connectivity.

The Highlighted features of this device include:

? Support for Bluetooth ? 5 features: High Speed Mode (2 Mbps PHY), Long Range (LE Coded 125 kbps and

500 kbps PHYs), Privacy 1.2.1 and Channel Selection Algorithm #2, as well as backwards compatibility and

support for key features from the Bluetooth ? 4.2 and earlier Low Energy specifications.

? Fully-qualified Bluetooth ? 5.3 software protocol stack included with the SimpleLink? CC23xx Software

Development Kit (SDK).

? Ultra-low standby current less than 0.71 μA with RTC operational and full RAM retention that enables

significant battery life extension especially for applications with longer sleep intervals.

? Integrated balun for reduced Bill-of-Material (BOM) board layout.

? Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ? Low Energy

(-102 dBm for 125 kbps LE Coded PHY, with integrated balun).

The CC2340R5-Q1 device is part of the SimpleLink? MCU platform, which consists of Wi-Fi?, Bluetooth Low

Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development

environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the

SimpleLink? platform enables you to add any combination of the portfolio’s devices into your design, allowing

100 percent code reuse when your design requirements change. For more information, visit SimpleLink? MCU

platform.