CPS-16中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

Features

– Configurable for Cut Through or Store And Forward data flow

– Device configurable through any of sRIO ports, I2

C, or JTAG

– Packet Trace. Each port provides the ability to match the first 160 bits

of any packet against up to 4 programmable comparison values to

copy the packet to a programmable output trace port

– Packet Filter. Each port also provides the ability to filter the packet

based on comparisons against these same 4 programmable values

mentioned above.

– Supports up to 10 simultaneous multicast masks – Broadcast support – Port Loopback Debug Feature – Software assisted error recovery, supporting hot swap – Ports may be individually turned off to reduce power – PMON counters for monitor and diagnostics. Per input port and

output port counters.

– SerDes physical diagnostic registers

– Embedded PRBS generation and detection with programmable polynomials support Bit Error Rate (BER) testing

– 0.13um technology

– Low power dissipation

– Full JTAG Boundary Scan Support (IEEE1149.1 & 1149.6)

– Package: 324-ball grid array, 19mm x 19mm, 1.0mm ball pitch