EVAL-ADUM4146EBZ開發板套件編程器的評估演示板及套件規格書PDF中文資料

EVAL-ADUM4146EBZ屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的EVAL-ADUM4146EBZ評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The ADuM4146 is a single-channel gate driver specifically optimized

for driving silicon carbide (SiC), metal-oxide semiconductor

field effect transistors (MOSFETs). Analog Devices, Inc., iCoupler?

technology provides isolation between the input signal and the

output gate drive.

The ADuM4146 includes a Miller clamp to provide robust SiC turn

off with a single-rail supply when the gate voltage drops to less

than 2 V. Operation with unipolar or bipolar secondary supplies is

possible with or without the Miller clamp operation.

The Analog Devices chip scale transformers also provide isolated

communication of control information between the high voltage and

low voltage domains of the chip. Information on the status of the

chip can be read back from dedicated outputs. Control of resetting

the device after a fault on the secondary side is performed on the

primary side of the device.

Integrated onto the ADuM4146 is a desaturation detection circuit

that provides protection against high voltage short-circuit SiC operation.

The desaturation protection contains noise reducing features,

such as a 300 ns masking time after a switching event to mask

voltage spikes due to initial turn on (see Figure 17). An optional

internal 500 μA current source allows low device count, and the

internal blanking switch allows the addition of an external current

source if more noise immunity is needed.

The secondary undervoltage lockout (UVLO) is set to 14.5 V (typical)

for Grade A and is set to 11.5 V (typical) for Grade B and

Grade C with common SiC and insulated gate bipolar transistor

(IGBT) levels taken into consideration.

FEATURES

? 11 A short-circuit source current (0 Ω gate resistance)

? 9 A short-circuit sink current (0 Ω gate resistance)

? 4.61 A peak current (2 Ω gate resistance)

? Output power device resistance: <1 Ω

? Output voltage range up to 30 V

? Multiple UVLO options on VDD2

? Grade A: 14.5 V (typical) UVLO on VDD2 positive going threshold

? Grade B and Grade C: 11.5 V (typical) UVLO on VDD2 positive

going threshold

? VDD1 input voltage range from 2.5 V to 6 V

? Desaturation protection

? Soft shutdown on desaturation fault

? Multiple desaturation detect comparator voltages

? Grade B: 9.2 V (typical)

? Grade A and Grade C: 3.5 V (typical)

? Miller clamp output with gate sense input

? Isolated fault and ready functions

? Low propagation delay: 75 ns (typical)

? Operating temperature range: ?40°C to +125°C

? Creepage distance: 8.3 mm minimum

? CMTI: 100 kV/μs

? Safety and regulatory approvals (pending)

? 5000 V rms for 1 minute per UL 1577

? CSA Component Acceptance Notice 5A

? DIN V VDE V 0884-11

? VIORM = 2150 V peak

APPLICATIONS

? SiC/MOSFET/IGBT gate drivers

? Photovoltaic (PV) inverters

? Motor drives

? Power supplies