EVKT-USBI2C-02-BAG中文資料美國芯源數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The MP2696B is a highly integrated, flexible,

switch-mode, battery-charging, power-path

management device designed for a single-cell

Li-ion and Li-polymer battery. This device can

be used in a wide range of portable applications.

The MP2696B integrates three battery-charging

phases: pre-charge, constant current charge,

and constant voltage charge. This device also

manages the input power source through input

current limit regulation and minimum input

voltage regulation.

The MP2696B can switch to boost mode to

generate the system power output from the

battery.

The MP2696B has an integrated IN to SYS

pass-through path to pass the input voltage to

the system.

Using an I2C interface, the host can flexibly

configure the charge and boost parameters.

The device operating status can also be read in

the registers.

Safety features include SYS short-circuit

protection (SCP), input over-voltage protection

(OVP), battery under-voltage protection (UVP),

thermal shutdown, and JEITA battery

temperature monitoring.

The MP2696B is available in a QFN-21

(3mmx3mm) package.

FEATURES

? 4.0V to 11V Operating Voltage Range

? Up to 16V Sustainable Input Voltage

? 500mA to 3.6A Configurable Charge

Current

? 3.6V to 4.45V Configurable Charge

Regulation Voltage with ±0.5 Accuracy

? 500mA to 3.5A Configurable Input Current

Limit with ±10 Accuracy

? Minimum Input Voltage Loop for Maximum

Adapter Power Tracking

? Ultra-Low 25μA Battery Discharge Current

in Idle Mode

? Boost Converter with Up to 4.0A of Output

Current:

o Configurable Output Current Limit Loop

o Configurable Boost Output Voltage

o USB Output Cable Compensation

o Configurable Inductor Peak Current

Limiting

? Comprehensive Safety Features:

o Fully Customizable JEITA Profile with

Configurable Temperature Threshold

o Charge Safety Timer

o Input Over-Voltage Protection (OVP)

o Thermal Shutdown

o SYS Over-Current (OC) and Short-

Circuit Protection (SCP)

? Analog Voltage Output IB Pin for Battery

Current Monitoring

? SYS Plug-In Detection

? SYS No Load Detection

? SYS DP/DM Interface for BC1.2 and Non-

Standard Adapters

? Status and Fault Monitoring

? Available in a QFN-21 (3mmx3mm)

Package

APPLICATIONS

? Sub-Battery Applications

? Power Bank Applications for Smartphones,

Tablets, and Other Portable Devices