FDA802B-VYT中文資料意法半導(dǎo)體數(shù)據(jù)手冊PDF規(guī)格書

Features

? AEC-Q100 (rev. G) qualified

? Integrated 110 dB D/A conversion

? I2S and TDM digital input (3.3/1.8 V)

? Input sampling frequency: 44.1 kHz, 48 kHz, 96

kHz, 192 kHz

? Full I2C bus driving (3.3/1.8 V) with 8 different

I2C bus addresses

? EMI control for FM/AM compatibility

? EMI compliance evaluated following normative

IEC61967-4 and IEC62132-4

? Low radiation function (LRF)

? Very low quiescent current

? Output low-pass filter included in the feedback

allowing outstanding audio performances

? Wide operating supply range: target 5.5 V-50 V

? MOSFET power outputs allowing high output

power capability under step-up voltage:

– 2 x 120 W /4 Ω @ 35 V, 1 kHz THD = 1

(2 x150 W /4 Ω @ 35 V, 1 kHz THD =10)

– 2 x 140 W /8 Ω @ 50 V, 1 kHz THD = 1

(2 x180 W /8 Ω @ 50 V, 1 kHz THD =10)

– 2 x 270 W /8 Ω @ 50 V max output power

? Operation under standard car battery with high

output power:

– 2 x 22 W /4 Ω @ 14 V, 1 kHz THD = 1

(2 x 28 W /4 Ω @ 14 V, 1 kHz THD = 10)

– 2 x 37 W /2 Ω @ 14 V, 1 kHz THD = 1

(2 x 46 W /2 Ω @ 14 V, 1 kHz THD = 10)

? Possibility to drive 2 Ω loads (until 18 V)

? Independent channel operation

? I2C bus diagnostics:

– Short to Vcc/GND diagnostic (including soft

shorts up to 1k Ω)

– DC load diagnostic

– AC load diagnostic (working both with

internally generated and externally

generated tone)

? Integrated fault protection

? Input and output offset detector

? Clipping detector

? Legacy mode ('no I2C' mode)

? Short circuit and ESD integrated protections

? Package: LQFP64 exposed pad up

Description

The FDA802B is a dual bridge class D amplifier, designed in the most advanced BCD

technology specially intended for car radio applications.

The FDA802B integrates a high performance D/A converter together with powerful

MOSFET outputs in class D, to get an outstanding efficiency compared to the standard

class AB.

The integrated D/A converter allows to reach outstanding performances (110 dB S/N ratio

with 110 dB of dynamic range).

Thanks to the high-voltage MOSFET output stages it can operate both under standard car

battery (6-18 V) and under boosted power supply (up to 50 V) to reach the highest possible

power with integrated solution.

The feedback loop is including the output L-C low-pass filter, allowing superior frequency

response linearity and lower distortion independently from the inductor and capacitor quality.

FDA802B is fully configurable through I2C bus interface and integrates a complete

diagnostics array specially intended for automotive applications.

Thanks to the solutions implemented to solve the EMI problems, the device is intended to

be used in the standard single DIN car-radio box together with the tuner.

Moreover FDA802B is able to work with power supply as low as 5.5 V, thus supporting the

most recent low voltage ('start-stop') car-makers specification.

The device provides a breakthrough innovative digital impedance-meter which is able to

communicate via I2C the output load value.