GD3160中文資料恩智浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書(shū)

General description

The GD3160 is an advanced, single-channel gate driver for IGBTs and SiC power devices. Integrated Galvanic

isolation and low on-resistance drive transistors provide high charging and discharging current, low dynamic

saturation voltage and rail-to-rail gate voltage control.

Current and temperature sense minimizes IGBT/SiC stress during faults. Accurate and configurable

undervoltage lockout (UVLO) provides protection while ensuring sufficient gate-drive voltage headroom.

The GD3160 autonomously manages severe faults and reports faults and status via INTB and/or INTA pins

and an SPI interface. It is capable of directly driving gates of most IGBTs and SiC MOSFETs. Self test, control,

and protection functions are included for design of high-reliability systems (ASIL C/D). The GD3160 meets the

stringent requirements of automotive applications and is fully AEC-Q100 grade 1 qualified.

Key features

? Integrated Galvanic signal isolation (up to 8 kV)

? High gate current integrated: 15 A source/sink capable

? SPI interface for safety monitoring, configuration, and diagnostic reporting

? Supports high switching frequencies: PWM up to 100 kHz

? Fail-safe state management from LV and HV domain for user-selectable safe state

? Programmable gate voltage regulator

? Temperature sense compatible with diode-based temperature sensors, NTC and PTC thermistors

? Configurable desaturation and current sense optimized for protecting SiC and IGBTs

? Integrated soft shutdown, two-level turn-off, optimized for unique gate drive requirements of SiC

? Real-time VCE and VGE reporting via INTA pin

? Integrated ADC for monitoring parameters from HV domain

? CMTI > 100 V/ns

? Compatible with 200 to 1700 V IGBT/SiC, power range > 125 kW

? Operating temperature range ?40 to 125 °C

? Available in 5.0 or 3.3 V logic interface variants

? Small package footprint (10 mm x 11 mm) 32-pin SOIC

Safety features

? Certified compliant with ISO 26262, supporting ASIL D level functional safety

? Error checking of SPI and configuration data with 8-bit CRC

? Autonomously manages severe faults and reports status via configurable INTB and/or INTA pins, and SPI

interface

? Current, DESAT, and temperature sense inputs and ADC reporting for IGBT/SiC monitoring and protection

? Interrupt pins (INTA and INTB) for fast response to faults

? Built-in self-check of all analog and digital circuits

? Continuous watchdog of communications across isolation barrier

? Deadtime enforcement

? Over- and undervoltage supervision of all power supplies on both low- and high-voltage sides

? Dedicated fail-safe state management pins on both low- and high-voltage sides

? VGE real-time cycle-by-cycle monitoring

Safety and regulatory approvals

? Reinforced isolation per DIN V VDE V 0884-10

? Withstand 5000 V rms (1 minute) isolation per UL 1577

? AEC-Q100 grade 1 automotive qualified