HCPL-2531-520E中文資料安華高數(shù)據(jù)手冊PDF規(guī)格書

Description

These dual channel optocoup lers contain a pair of light emitting diodes and integrated photo-detec tors with electrical insulation between input and output. Separate connection for the photodiode bias and output transistor collectors increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

These dual channel optocouplers are available in an 8 Pin DIP and in an industry standard SO-8 package. The following is a cross reference table listing the 8 Pin DIP part number and the electrically equivalent SO-8 part number.

Features

? 15 kV/μs minimum common mode transient immunity at VCM = 1500 V (HCPL-4534/0534)

? TTL compatible

? Available in 8 pin DIP, SO-8, and 8 pin DIP – gull wing surface mount (option 020) packages

? High density packaging

? 3 MHz bandwidth

? Open collector outputs

? Safety approval

UL Recognized – 3750 V rms for 1 minute (5000 V rms

for 1 minute for Option 020) per UL1577

CSA Approved

IEC/EN/DIN EN 60747-5-2

– VIORM = 630 Vpeak for HCPL-2530/2531/4534 0ption 060

– VIORM = 560 Vpeak for HCPL-0530/0531/0534 0ption 060

? Single channel version available (4502/3, 0452/3)

? MIL-PRF-38534 hermetic version available

(55XX/65XX/4N55)

Applications

? Line receivers – high common mode transient immunity (>1000 V/μs) and low input-output capacitance (0.6 pF)

? High speed logic ground isolation – TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL

? Replace pulse transformers – save board space and weight

? Analog signal ground isolation – integrated photon detector provides improved linearity over phototran sistor type

? Polarity sensing

? Isolated analog amplifer – dual channel packaging enhances thermal tracking