IDT72261L15G中文資料IDT數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION:

The IDT72261/72271 are monolithic, CMOS, high capacity, high speed, low power first-in, first-out (FIFO) memories with clocked read and write controls. These FIFOs are applicable for a wide variety of data buffering needs, such as optical disk controllers, local area networks (LANs), and interprocessor communication.

FEATURES:

? 16,384 x 9-bit storage capacity (IDT72261)

? 32,768 x 9-bit storage capacity (IDT72271)

? 10ns read/write cycle time (8ns access time)

? Retransmit Capability

? Auto power down reduces power consumption

? Master Reset clears entire FIFO, Partial Reset clears data, but retains programmable settings

? Empty, Full and Half-full flags signal FIFO status

? Programmable Almost Empty and Almost Full flags, each flag can default to one of two preselected offsets

? Program partial flags by either serial or parallel means

? Select IDT Standard timing (using EF and FF flags) or First Word Fall Through timing (using OR and IR flags)

? Easily expandable in depth and width

? Independent read and write clocks (permit simultaneous reading and writing with one clock signal

? Available in the 64-pin Thin Quad Flat Pack (TQFP), 64-pin Slim Thin Quad Flat Pack (STQFP) and the 68-pin Pin Grid Array (PGA)

? Output enable puts data outputs into high impedance

? High-performance submicron CMOS technology

? Industrial temperature range (-40OC to +85OC) is available, tested to military electrical specifications