IP4359CX4LF-H500中文資料安世數(shù)據(jù)手冊(cè)PDF規(guī)格書

1.1General description

The IP4359CX4 is a dual channel low capacitance ElectroStatic Discharge (ESD) protection device, providing protection to downstream components from ESD voltages as high as ±15 kV contact discharge and > ±15 kV air discharge according the IEC 61000-4-2 model, far exceeding standard level 4.

The device is optimized for protection of high speed interfaces such as Universal Serial Bus (USB) 2.0, High Definition Multimedia Interface (HDMI), Digital Visual Interface (DVI) and other interfaces requiring very low capacitance ESD protection.

The device is available in two different heights. 0.61 mm and reduced maximum height of 0.5 mm. Both versions contain identical circuits and show an identical electrical performance. Both ESD protection channels share common ground connections, but are electrically separated, thereby preventing current back drive into the adjacent channel. IP4359CX4 is fabricated using monolithic silicon technology in a single Wafer-Level Chip-Scale Package (WLCSP). These features make the IP4359CX4 ideal for use in applications requiring component miniaturization such as mobile phone handsets and other portable electronic devices.

1.2Features and benefits

Pb-free, RoHS compliant and free of halogen and antimony (Dark Green compliant)

2 ultra low input capacity rail-to-rail ESD protection diodes with C(I/O-GND) = 1.3 pF

Rdyn = 0.45 Ω

Integrated ESD protection withstanding ±15 kV contact discharge and > ±15 kV air discharge, far exceeding IEC 61000-4-2 level 4

Standard height version (0.61 mm) available as IP4359CX4/LF

Reduced height version (maximum height of 0.5 mm) available as IP4359CX4/LF-H500

2 × 2 solder ball WLCSP with 0.4 mm pitch

1.3Applications

High-speed interface ESD protection such as USB 2.0, HDMI, DVI etc.

Interfaces with special requirements on low capacitive ESD protection

Interfaces requiring separation of the positive clamping voltage/current path