ISL8273MAIRZ中文資料Intersil數(shù)據(jù)手冊PDF規(guī)格書

The ISL8273M is a complete PMBus enabled DC/DC single

channel step-down advance power supply capable of delivering

up to 80A of current and optimized for high power density

applications. For higher output current, up to four ISL8273Ms

can be paralleled to supply up to 320A in a multiphase current

sharing configuration.

Operating over an input voltage range of 4.5V to 14V, the

ISL8273M offers adjustable output voltages down to 0.6V and

achieves up to 93 conversion efficiencies. A unique

ChargeMode? control architecture provides a single clock cycle

response to an output load step and can support switching

frequencies up to 1MHz. The power module integrates all power

and most passive components and only requires a few external

components to operate. A set of optional external resistors allows

the user to easily configure the device for standard operation. For

advanced configurations, a standard PMBus interface addresses

such things as sequencing and fault management, as well as

real-time full telemetry and point-of-load monitoring. Additionally,

an on-board nonvolatile memory can store the desired custom

configuration and settings.

A fully customizable voltage, current and temperature

protection scheme insures safe operation for the ISL8273M

under abnormal operating conditions. The device is also

supported by the PowerNavigator? software, a full digital

power train development environment.

The ISL8273M is available in a low profile compact

18mmx23mmx7.5mm fully encapsulated thermally enhanced

HDA package.

Features

? Complete digital power supply

? 80A single channel output current

- 4.5V to 14V single rail input voltage

- Up to 93 efficiency

- Up to 320A/4 parallel modules capable solution

- Multiphase and current sharing operations (180°/22.5°

steps)

? Programmable output voltage

- 0.6V to 2.5V output voltage settings

- ±1 accuracy over line/load/temperature

? ChargeMode? control loop architecture

- 296kHz to 1.06MHz fixed switching frequency operations

- No compensation required

- Fast single clock cycle transient response

? PMBus interface and/or pin-strap mode

- Fully programmable through PMBus

- Pin-strap mode for standard settings

- Real-time telemetry for VIN, VOUT, IOUT, temperature, duty

cycle and fSW

? Advanced soft-start/stop, sequencing and margining

? On-board nonvolatile memory

? Complete over/undervoltage, current and temperature

protections with fault logging

? PowerNavigator? supported

? Thermally enhanced 18mmx23mmx7.5mm HDA package

Applications

? Server, telecom, storage and datacom

? Industrial/ATE and networking equipment

? General purpose power for ASIC, FPGA, DSP and memory