首頁>K137A-D009N-1BT2-CXXXX>規格書詳情
K137A-D009N-1BT2-CXXXX中文資料宏發科技數據手冊PDF規格書
K137A-D009N-1BT2-CXXXX規格書詳情
Application Notes
1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply.
2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 50ms minimum to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or energize the coil for longer than 1 minute (damage to the coil could occur).
3. Applying excessive heat to the relay terminals (soldering or welding) can cause damage to the internal structure of the relay and should be avoided.
4. Moving or bending the terminals can cause damage to the internal structure of the relay and should be avoided.
5. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
FUJI |
2023+ |
TO-220F |
5800 |
進口原裝,現貨熱賣 |
詢價 | ||
KINGWELL |
23+ |
SOT-23 |
45000 |
原裝正品現貨 |
詢價 | ||
TOSHIBA/東芝 |
23+ |
TO-3PL |
13000 |
原廠授權一級代理,專業海外優勢訂貨,價格優勢、品種 |
詢價 | ||
TOS |
23+ |
TO-3P |
8000 |
只做原裝現貨 |
詢價 | ||
JINGDAO/晶導微 |
23+ |
ABS |
69820 |
終端可以免費供樣,支持BOM配單! |
詢價 | ||
TOSHIBA |
1923+ |
TO220 |
3689 |
原裝進口現貨庫存專業工廠研究所配單供貨 |
詢價 | ||
TOSHIBA |
25+ |
TO-3PL |
12300 |
獨立分銷商 公司只做原裝 誠心經營 免費試樣正品保證 |
詢價 | ||
FUJI |
24+ |
TO-3P |
5000 |
全現原裝公司現貨 |
詢價 | ||
富士通FUJITSU |
23+24 |
TO-220 |
9860 |
原廠原包裝。終端BOM表可配單?？砷_13%增值稅 |
詢價 | ||
FUJITSU/富士通 |
21+ |
TO-220F |
10000 |
原裝現貨假一罰十 |
詢價 |
