L9654集成電路（IC）的專用IC規格書PDF中文資料

L9654屬于集成電路（IC）的專用IC。由意法半導體集團制造生產的L9654專用 IC專用專用集成電路 (IC) 或芯片設計用于執行特定功能。這個類別包括可尋址開關、空芯儀表驅動器、音視頻開關、驗證芯片、自動放電、時鐘發生器、彩色掃描儀，以及各種應用所用的其他許多集成電路。

Features

? 4 deployment drivers sized to deliver 1.2 A

(min) for 2 ms (min) and 1.75 A (min) for

1ms (min).

? Independently controlled high-side and lowside MOS for diagnosis

? Analog output available for resistance

? Squib short to ground, short to battery and

MOS diagnostic available on SPI register

? Capability to deploy the squib with 1.2 A (min.)

or 1.75 A under 35 V load-dump condition and

the low-side MOS is shorted to ground

? Capability to deploy the squib with 1.2 A (min.)

at 6.9 V VRES and 1.75 A at 12 V VRES.

? Interface with 2 satellite sensors

? Programmable independent current trip points

for each satellite channel

? Support Manchester protocol for satellite

sensors

? Supports for variable bit rate detection

? Independent current limit and fault timer

shutdown protection for each satellite output

? Short to ground and short to battery detection

and reporting for each satellite channel

? 5.5 MHz SPI interface

? Satellite message error detection

? Low voltage internal reset

? 2 kV ESD capability on all pins

? Package: 48 lead LQFP

? Technology: ST Proprietary BCD5s (0.57 μm)

Description

L9654 is intended to deploy up to 4 squibs and to

interface up to 2 satellites.

Squib drivers are sized to deploy 1.2 A (min.) for

2 ms (min.) during load dump and 1.75 A (min.)

for 1 ms (min.) during load dump.

Diagnostic of squib driver and squib resistance

measurement is controlled by micro controllers.

Satellite interfaces support Manchester decoder

with variable bit rates.