L99MOD50XP集成電路（IC）的專用IC規格書PDF中文資料

L99MOD50XP屬于集成電路（IC）的專用IC。由意法半導體集團制造生產的L99MOD50XP專用 IC專用專用集成電路 (IC) 或芯片設計用于執行特定功能。這個類別包括可尋址開關、空芯儀表驅動器、音視頻開關、驗證芯片、自動放電、時鐘發生器、彩色掃描儀，以及各種應用所用的其他許多集成電路。

Features

? AEC-Q100 qualified

? Two half bridges for 6 A load

(RDSon = 150 m??

? Two half bridges for 3 A load (RDSon = 300 m?)

? Two half bridges for 0.75 A load

(RDSon = 1600 m?)

? One high-side driver for 6 A load (RDSon =

90 m?)

? Two configurable high-side drivers for up to

1.5A load (R DSon = 500 m???or? 0.4 A load

(RDSon = 1800 m?)

? Two high-side drivers for 0.5 A load

(R DSon = 1600 m?)

? Programmable soft start function to drive loads

with higher inrush currents as current limitation

value

? Very low current consumption in standby mode

(IS < 6 μA typ; Tj ??85 °C; ICC<5 μA typ;

Tj ??? 85 °C)

? Current monitor output for all high-side drivers

? Device contains temperature warning and

protection

? Open-load detection for all outputs

? Over-current protection for all outputs

? PWM control of all outputs

? Charge pump output for reverse polarity

protection

? ST standard serial peripheral interface

(ST-SPI 3.0)

Description

The L99MOD50XP is a microcontroller-driven multifunctional actuator driver for automotive applications.

Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five high-side drivers.

The integrated SPI controls all operating modes (forward, reverse, brake and high impedance).

Also all diagnostic information is available via SPI read.

Applications

L99MOD devices are recommended for those applications that need multiple motors control with additional loads in high-side configuration, such as bulbs/LEDs or requiring protected supply, like sensors or cameras.