MAX18000中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

General Description

The MAX18000 is a nanoPower boost converter with an

input voltage range of 0.5V to 5.5V (VOUT > VIN + 0.2V)

and a switching current limit of 3.6A. It features an ultralow

quiescent current of 512nA which makes it ideal for

battery-powered applications requiring a long standby

time. The IC operates in nanoPower mode at low loads

and transitions into skip and CCM modes of operation at

higher load currents to ensure high efficiency over a

wide current range.

The output voltage can be varied between 2.5V and 5.5V

using a single RSEL resistor.

The IC features a True Shutdown? mode, which

disconnects VIN and VOUT when the EN pin is pulled

low. It also features short-circuit protection circuitry that

limits the current to 700mA when VOUT < 0.5V and

automatically restarts the part when the fault is removed.

The thermal-shutdown protection disables the part when

the junction temperature crosses +165°C (typ).

The IC is available in 1.07mm x 1.57mm, 6-bump waferlevel package (WLP).

Benefits and Features

? 0.5V to 5.5V Input Voltage (VOUT > VIN + 0.2V)

? 1.8V Minimum Start-Up Voltage

? 2.5V to 5.5V (In 100mV Steps) Output Voltage

? 3.6A Cycle-by-Cycle Inductor Current Limit

? 512nA IQ Supply Current into the Output

? True-Shutdown Mode

- 7nA Shutdown Current

- Output Disconnects from Input with no

Forward or Reverse Current

? Output Short-Circuit Protection

? Thermal-Shutdown Protection

? 95 Peak Efficiency with 90 or Higher

Efficiency for Load > 20μA

? 1.07mm x 1.57mm, 0.5mm Pitch 6-Bump WLP

? -40°C to +125°C Operating Temperature Range

Key Applications

? Wearable Applications

? IoT Applications

? Battery-Powered Applications

? Portable Devices

? Metering Applications