MB88344中文資料富士通數據手冊PDF規格書

■ DESCRIPTION

MB88344/MB88344B are 8-bit 36 channels D/A converters which have two reference voltages to use 36 channels as 12 channels and 24 channels independently.

Each output channels has an operational amplifier output buffer and so large current drive is possible.

In the MB88344B, 6 Channels of DAC output (AO31-AO36) have four data registers each and so, the analog output can be changed by the address input from A0 and A1 pins.

Digital data are input to the devices in serial and it is controlled by CLK and LD pins. This configuration makes a cascade connections between devices.

The MB88344/MB88344B are suitable for electronic volumes and replacement for potentiometers for adjustment, in addition to normal D/A converter applications.

■ FEATURES

? Ultra low power consumption : Type. 1.1mW/channel

? Ultra small package

? Conversion method : R-2R resistor ladder

? On-chip operational amplifier output buffers : Max. +1.0/–1.0mA analog output sink/source current capability

? Analog data output range : 0 to VCC [V]

? Two analog output reference voltage : Analog data can be output in different reference voltages.

? For data resisters for AO31-AO36 channels (MB88344B only) : Analog output can be changed by the A0 and A1 analog block.

? Separate supply voltge for digital block and analog block.

? Direct control can be done from 3 V-system MCU:

MB88344 : Input “H” Voltage = 0.5 VCC, Input “L” Voltage = 0.2 VCC

MB88344B : Input “H” Voltage = 2.1 V, Input “L” Voltage = 0.6 V

? Max. 2.5 MHz serial data input

? Silicon-gate CMOS process

? Package options:

MB88344: 48-pin plastic SH-DIP/QFP/LQFP

MB88344B: 48-pin plastic SH-DIP/LQFP