MB90F488B中文資料富士通數(shù)據(jù)手冊PDF規(guī)格書

■DESCRIPTION

The MB90480B/485B series is a 16-bit general-purpose FUJITSU SEMICONDUCTOR microcontroller designed for process control in consumer devices and other applications requiring high-speed real-time processing.

The F2MC-16LX CPU core instruction set retains the AT architecture of the F2 MC*1

family, with additional instructions for high-level languages, expanded addressing mode, enhanced multiply-drive instructions, and complete bit processing. In addition, a 32-bit accumulator is provided to enable long-word processing.

The MB90480B/485B series features embedded peripheral resources including 8/16-bit PPG, expanded I/O serial interface, UART, 10-bit A/D converter, 16-bit I/O timer, 8/16-bit up/down-counter, PWC timer, I2C interface, DTP/external interrupt, chip select, and 16-bit reload timer.

■FEATURES

?Clock

Minimum instruction execution time: 40.0 ns/6.25 MHz base frequency multiplied ×4 (25 MHz internal operating

frequency/3.3 V ±0.3 V)

62.5 ns/4 MHz base frequency multiplied ×4 (16 MHz internal operating

frequency/3.0 V ±0.3 V) PLL clock multiplier

? Maximum memory space: 16 Mbytes

? Instruction set optimized for controller applications

Supported data types (bit, byte, word, or long word)

Typical addressing modes (23 types)

32-bit accumulator for enhanced high-precision calculation

Enhanced signed multiplication/division instruction and RETI instruction functions

? Instruction set designed for high-level programming language (C) and multi-task operations

System stack pointer adopted

Instruction set symmetry and barrel shift instructions

? Non-multiplex bus/multiplex bus compatible

? Enhanced execution speed 4-byte instruction queue

? Enhanced interrupt functions

8 levels setting with programmablepriority, 8 external interrupts

? Data transfer function (μDMAC) Up to 16 channels

? Embedded ROM Flash versions : 192 Kbytes, 256 Kbytes, 384 Kbytes, MASK versions : 192 Kbytes, 256 Kbytes

? Embedded RAM Flash versions : 4 Kbytes, 6 Kbytes, 10 Kbytes, 24 Kbytes, MASK versions : 10 Kbytes, 16 Kbytes

? General purpose ports Up to 84 ports (Includes 16 ports with input pull-up resistance settings, 16 ports with output open-drain settings)

? A/D converter

8-channel RC sequential comparisontype (10-bit resolution, 3.68 μs conversion time (at 25 MHz) )

?I2C interface (MB90485B series only) : 1channel, P76/P77 N-ch open drain pin (without P-ch)

Do not apply high voltage in excess of recommended operating ranges to the N-ch open drain pin (with P-ch) in MB90V485B.

? μPG (MB90485B series only) : 1 channel

? UART : 1 channel

? Extended I/O serial interface (SIO) : 2 channels

? 8/16-bit PPG : 3 channels (with 8-bit ×6 channel/16-bit ×3 channel mode switching function)

? 8/16-bit up/down counter/timer: 1 channel (with 8-bit ×2 channels/16-bit ×1-channel mode switching function)

? PWC (MB90485B series only) : 3 channels (Capable of compare the inputs to two of the three)

? 3 V/5 V I/F pin (MB90485B series only) P20 to P27, P30 to P37, P40 to P47, P70 to P77

? 16-bit reload timer : 1 channel

? 16-bit I/O timer : 2 channels input capture, 6 channels output compare, 1 channel free-run timer

? On chip dual clock generator system

? Low-power consumption mode With stop mode, sleep mode, CPU intermittent operation mode, watch mode, timebase timer mode

? Packages : QFP 100/LQFP 100

? Process : CMOS technology

? Power supply voltage : 3 V, single power supply (some ports can be operated by 5 V power supply at MB90485B series)