MCP2510-I集成電路（IC）的控制器規格書PDF中文資料
| 廠商型號 |
MCP2510-I |
| 參數屬性 | MCP2510-I 封裝/外殼為18-SOIC（0.295"，7.50mm 寬）；包裝為卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶；類別為集成電路（IC）的控制器；產品描述：IC CAN CONTRLER IND TEMP 18SOIC |
| 功能描述 | 控制器 |
| 封裝外殼 | 18-SOIC（0.295"，7.50mm 寬） |
| 文件大小 |
703.58 Kbytes |
| 頁面數量 |
80 頁 |
| 生產廠商 | Microchip Technology |
| 企業簡稱 |
Microchip【微芯科技】 |
| 中文名稱 | 微芯科技股份有限公司官網 |
| 原廠標識 |  |
| 數據手冊 | |
| 更新時間 | 2025-2-12 10:59:00 |
MCP2510-I規格書詳情
MCP2510-I屬于集成電路（IC）的控制器。由微芯科技股份有限公司制造生產的MCP2510-I控制器該系列產品主要用于在采用不同通信協議和/或信令方法的端點之間提供信息連接。示例包括將 I2C 總線連接到 UART，將 USB 連接到 I2C、SPI、以太網或 UART、以太網 MAC 和 PHY 等的器件。此外，還包括用于通過為點對點通信設計的接口建立多路連接的器件，例如 USB 集線器控制器。
Description
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages. It is also capable of both acceptance filtering and message management. It includes three transmit buffers and two receive buffers that reduce the amount of microcontroller (MCU) management required. The MCU communication is implemented via an industry standard Serial Peripheral Interface (SPI) with data rates up to 5 Mb/s.
Features
? Implements Full CAN V2.0A and V2.0B at 1 Mb/s:
- 0 - 8 byte message length
- Standard and extended data frames
- Programmable bit rate up to 1 Mb/s
- Support for remote frames
- Two receive buffers with prioritized message storage
- Six full acceptance filters
- Two full acceptance filter masks
- Three transmit buffers with prioritization and abort features
- Loop-back mode for self test operation
? Hardware Features:
- High Speed SPI Interface (5 MHz at 4.5V I temp)
- Supports SPI modes 0,0 and 1,1
- Clock out pin with programmable prescaler
- Interrupt output pin with selectable enables
- ‘Buffer full’ output pins configureable as interrupt pins for each receive buffer or as general purpose digital outputs
- ‘Request to Send’ input pins configureable as control pins to request immediate message transmission for each transmit buffer or as general purpose digital inputs
- Low Power Sleep mode
? Low power CMOS technology:
- Operates from 3.0V to 5.5V
- 5 mA active current typical
- 10 μA standby current typical at 5.5V
? 18-pin PDIP/SOIC and 20-pin TSSOP packages
? Temperature ranges supported:
- Industrial (I): -40°C to +85°C
- Extended (E): -40°C to +125°C
產品屬性
更多- 產品編號：
MCP2510-I/SO
- 制造商：
Microchip Technology
- 類別：
集成電路（IC） > 控制器
- 包裝：
卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶
- 協議：
CANbus
- 功能：
控制器
- 接口：
SPI
- 標準：
CAN 2.0
- 電壓 - 供電：
3V ~ 5.5V
- 電流 - 供電：
10mA
- 工作溫度：
-40°C ~ 85°C
- 封裝/外殼：
18-SOIC（0.295"，7.50mm 寬）
- 供應商器件封裝：
18-SOIC
- 描述：
IC CAN CONTRLER IND TEMP 18SOIC
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
MICROCHIP |
22+23+ |
18-DIP300 |
17682 |
絕對原裝正品全新進口深圳現貨 |
詢價 | ||
MICROCHIP |
24+ |
12 |
原裝現貨,可開13%稅票 |
詢價 | |||
MICROCHIP/微芯 |
22+ |
SOP18 |
24822 |
原裝正品現貨 |
詢價 | ||
Microchip |
24+ |
原廠封裝 |
28500 |
授權代理直銷,原廠原裝現貨,假一罰十,特價銷售 |
詢價 | ||
MICROCHIP |
23+ |
TSSOP20 |
7750 |
全新原裝優勢 |
詢價 | ||
MICROCHIP/微芯 |
1948+ |
DIP18 |
6852 |
只做原裝正品現貨!或訂貨假一賠十! |
詢價 | ||
MICRON |
22+ |
DIP |
10000 |
原裝正品優勢現貨供應 |
詢價 | ||
MICROCHIP/微芯 |
23+ |
DIP18 |
30000 |
原裝現貨,假一賠十. |
詢價 | ||
Microch |
21+ |
SOP |
12588 |
全新原裝深圳現貨 |
詢價 | ||
MICROCHI |
05+ |
原廠原裝 |
4335 |
只做全新原裝真實現貨供應 |
詢價 |
