MCP622T中文資料微芯科技數(shù)據(jù)手冊PDF規(guī)格書

Description

The Microchip Technology Inc. MCP621/1S/2/3/4/5/9

family of high bandwidth and high slew rate operational

amplifiers features low offset. At power-up, these op

amps are self-calibrated using mCal. Some package

options also provide a Calibration/Chip Select pin

(CAL/CS) that supports a Low-Power mode of

operation, with offset calibration at the time normal

operation is re-started. These amplifiers are optimized

for high speed, low noise and distortion, single-supply

operation with rail-to-rail output and an input that

includes the negative rail.

This family is offered in single (MCP621 and

MCP621S), single with CAL/CS pin (MCP623), dual

(MCP622), dual with CAL/CS pins (MCP625), quad

(MCP624) and quad with CAL/CS pins (MCP629). All

devices are fully specified from -40°C to +125°C.

Features

? Gain-Bandwidth Product: 20 MHz (typical)

? Slew Rate: 10 V/μs

? Low Input Offset: ±200 μV (maximum)

? Low Input Bias Current: 5 pA (typical)

? Noise: 13 nV/?Hz, at 1 MHz

? Ease-of-Use:

- Unity-Gain Stable

- Rail-to-Rail Output

- Input Range incl. Negative Rail

- No Phase Reversal

? Supply Voltage Range: +2.5V to +5.5V

? High Output Current: ±70 mA

? Supply Current: 2.5 mA/Ch (typical)

? Low-Power Mode: 5 μA/Ch

? Small Packages: SOT23-5, DFN

? Extended Temperature Range: -40°C to +125°C

Typical Applications

? Optical Detector Amplifier

? Barcode Scanners

? Multi-Pole Active Filter

? Driving A/D Converters

? Fast Low-Side Current Sensing

? Power Amplifier Control Loops

? Consumer Audio