ML60852A中文資料沖電線數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ML60852A is a general purpose Universal Serial Bus (USB) device controller.

The ML60852A provides a USB serial interface engine, USB transceiver, FIFOs, control/status registers, application interface circuit, and oscillation circuit thereby easily realizing a USB system. The ML60852A supports four types of data transfer such as control transfer, bulk transfer, interrupt transfer and isochronous transfer, and also supports five or six endpoints.

FEATURES

? USB1.1 compliant

? Supports full-speed (12 Mbps).

? Supports four types of transfer; control transfer, bulk transfer, interrupt transfer, and isochronous transfer.

? Endpoints: 5 to 6 endpoints

Control EP 1

Bulk/interrupt EP 3

Isochronous/bulk/interrupt EP 1 or 2

? Built-in FIFO for data storage

? A two-layer configuration of FIFO for each of EP1, EP2, EP4, and EP5

? 8/16 bit DMA supported (EP1, EP2, EP4, and EP5)

? Intelligent Serial Interface Engine (SIE)

? Supports bus-powered device.

The suspend condition is automatically detected and the low-power mode is activated. Normal operation is automatically restarted when the resume condition is detected.

? Built-in USB transceiver circuit

? Ta = -20 to +80 °C

? VCC=3.0 to 3.6 V

? Interface with 5 V circuit is possible. (Input: 5 V tolerant, output: TTL)

? Built-in 12 MHz /6 MHz oscillation circuit

? Package options:

44-pin plastic TQFP

56-pin plastic LGA