MSK4351-1HD中文資料安倫數(shù)據(jù)手冊(cè)PDF規(guī)格書

DESCRIPTION:

The MSK4351-1 is a 50 Amp, 3 Phase Isolated Bridge Smart Power Motor Drive Hybrid with a 500 volt rating. The output switches are Insulated Gate Bipolar Transistors (IGBTs) tailored for high switching speeds. The free-wheeling diodes are Fast Recovery Epitaxial Diodes (FREDs) to provide matched current capabilities with the IGBTs and are specified with excellent reverse recovery times at high current ratings. The bridge is optically isolated from the control circuitry. This new smart power motor drive hybrid is compatible with 5V CMOS logic levels. The internal circuitry prevents simultaneous turn-on of the in-line half bridge transistors with adjustable deadtime to prevent shoot-through. Undervoltage lockout shuts down the bridge when the supply voltage gets to a point of incomplete turn-on of the output switches. The isolated internal high-side power supply derived from the +15 volt supply completely eliminates the need for 3 floating independent power supplies for the high-side drive. This device is Identical to obsolete MSK4351 except the sense resistor value is now 3.3mW.

FEATURES:

? Identical to Obsolete MSK4351 Except the Sense Resistor Value is now 3.3mW

? Replaces Obsolete MSK4351

? 500V, 50 Amp Capability at 110°C

? Fully Isolated Bridge

? Ultra Low Thermal Resistance

? Integral Free Wheeling Fast Recovery Epitaxial Diode (FRED)

? Self-Contained, Smart Lowside/Highside Drive Circuitry and Isolated Supply

? Adjustable Deadtime

? Capable of Switching Frequencies to 20KHz

? Isolated Case Allows Direct Heat Sinking; On Board Temp Sensor

? Bolt-down Design Allows Superior Heat Dissipation