MX29F040TI-90中文資料????????????旺宏數據手冊PDF規格書

GENERAL DESCRIPTION

The MX29F040 is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F040 is packaged in 32-pin PLCC, TSOP, PDIP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

? 524,288 x 8 only

? Single power supply operation

- 5.0V only operation for read, erase and program operation

? Fast access time: 55/70/90/120ns

? Low power consumption

- 30mA maximum active current(5MHz)

- 1uA typical standby current

? Command register architecture

- Byte Programming (7us typical)

- Sector Erase 8 equal sectors of 64K-Byte each

? Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors with Erase Suspend capability.

- Automatically program and verify data at specified address

? Erase suspend/Erase Resume

- Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.

? Status Reply

- Data polling & Toggle bit for detection of program and erase cycle completion.

? Sector protect/unprotect for 5V only system or 5V/ 12V system.

? Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

? 100,000 minimum erase/program cycles

? Latch-up protected to 100mA from -1V to VCC+1V

? Low VCC write inhibit is equal to or less than 3.2V

? Package type:

- 32-pin PLCC, TSOP or PDIP

? Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash

? 20 years data retention