ORS120A150SD工業自動化與控制的延時繼電器規格書PDF中文資料

Description

The ORS Series’ open PCB construction offers the user good

economy without sacrificing performance and reliability. The

output relay is available in isolated, 10A, DPDT or SPDT forms.

The time delay may be ordered as factory fixed, onboard knob,

or external adjustment. All connections are 0.25 in. (6.35 mm)

male quick connect terminals.

Operation (Single Shot)

Input voltage must be applied before and during timing. Upon

momentary or maintained closure of the initiate switch (leading

edge triggered), the output relay energizes for a measured

interval of time. At the end of the time delay, the output

de-energizes. Opening or reclosing the initiate switch during

timing has no affect on the time delay. The output will energize

if the initiate switch is closed when input voltage is applied.

Reset: Reset occurs when the time delay is complete and the

initiate switch is opened. Loss of input voltage resets the time

delay and output.

FEATURES BENEFITS

Open PCB construction Reduces cost without sacrificing performance

and reliability

Analog circuitry Repeat accuracy + / - 2,

Factory calibration + / - 10

Isolated, 10A, SPDT or

DPDT output contacts Allows control of loads for AC or DC voltages

Line voltage initiation Separate control voltage is not required

for operation