PCA9506集成電路（IC）的I/O擴(kuò)展器規(guī)格書(shū)PDF中文資料

General description

The PCA9506 provides 40-bit parallel input/output (I/O) port expansion for I2C-bus applications organized in 5 banks of 8 I/Os. At 5 V supply voltage, the outputs are capable of sourcing 10 mA and sinking 25 mA with a total package load of 800 mA to allow direct driving of 40 LEDs. Any of the 40 I/O ports can be configured as an input or output. Output ports are totem-pole and their logic state changes at the Acknowledge (bank change).

Features

■ Standard mode (100 kHz) and Fast mode (400 kHz) compatible I2C-bus serial interface

■ 2.3 V to 5.5 V operation with 5.5 V tolerant I/Os

■ 40 configurable I/O pins that default to inputs at power-up

■ Outputs:

◆ Totem-pole (10 mA source, 25 mA sink) with controlled edge rate output structure

◆ Active LOW output enable (OE) input pin 3-states all outputs

◆ Output state change on Acknowledge

■ Inputs:

◆ Open-drain active LOW interrupt (INT) output pin allows monitoring of logic level change of pins programmed as inputs

◆ Programmable Interrupt Mask Control for input pins that do not require an interrupt when their states change

◆ Polarity Inversion register allows inversion of the polarity of the I/O pins when read

■ Active LOW reset (RESET) input pin resets device to power-up default state

■ 3 programmable address pins allowing 8 devices on the same bus