S6B0794中文資料三星數(shù)據(jù)手冊(cè)PDF規(guī)格書

INTRODUCTION

The S6B0794 is a 160-outputs segment/common driver LSI for graphic dot-matrix liquid crystal display systems. It is fabricated by low power CMOS high voltage process technology. This device consists of 160-bits bi-directional shift register, 160-bits data latch and 160-bits driver. In case of segment mode, the data input is selected 4bit parallel input mode and 8bit parallel input mode by a mode (MD) pin. In case of common mode, data input/output pins are bi-directional, four data shift directions are pin-selectable.

FEATURES

Both Segment Mode and Common Mode

- Supply voltage for LC driver: +15.0 to +32.0V

- Number of LC driver outputs: 160

- Low output impedance

- Low power consumption

- Supply voltage for the logic system: +2.4V to +5.5V

- CMOS silicon gate process (P-type Silicon Substrate)

- Package: 190-pin TCP (Tape Carrier Package) & Gold bumped chip

Segment Mode

- Shift clock frequency: 14MHz (Max) (Vdd=+5V±10)

8MHz (Max) (Vdd=+2.4V to +4.5V)

- Adopts a data bus system

- 4-bit / 8-bit parallel input modes are selectable with a mode (MD) pin

- Automatic transfer function of an enable signal

- Automatic counting function which, in the chip select, causes the internal clock to be stopped by automatically counting 160 of input data

- Line latch circuit reset function when DISPOFFB active

Common Mode

- Shift clock frequency: 4.0MHz (Max) (vdd=+2.4V to +5.5V)

- Built-in 160 bits bi-directional shift register (divisible into 80-bits x2)

- Available in a single mode (160-bits shift register) or in a dual mode(80-bits shift register x2)

- Shift register circuit reset function when DISPOFFB active