SC18IS600IBS集成電路（IC）的控制器規(guī)格書PDF中文資料

General description

The SC18IS600 is designed to serve as an interface between the standard SPI of a host (microcontroller, microprocessor, chip set, etc.) and the serial I2C-bus. This allows the host to communicate directly with other I2C-bus devices. The SC18IS600 can operate as an I2C-bus master-transmitter or master-receiver. The SC18IS600 controls all the I2C-bus specific sequences, protocol, arbitration and timing.

Features and benefits

■ SPI slave interface

■ SPI Mode 3

■ Single master I2C-bus controller

■ Four General Purpose Input/Output (GPIO) pins

■ Two quasi-bidirectional I/O pins

■ 5 V tolerant I/O pins

■ High-speed SPI: Up to 1.2 Mbit/s

■ High-speed I2C-bus: 400 kbit/s

■ 96-byte transmit buffer

■ 96-byte receive buffer

■ 2.4 V to 3.6 V operation

■ Power-down mode with WAKEUP pin

■ Internal oscillator

■ Active LOW interrupt output

■ Available in very small TSSOP16 and HVQFN24 packages