SCN2681AE1A44中文資料飛利浦數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The Philips Semiconductors SCN2681 Dual Universal Asynchronous Receiver/Transmitter (DUART) is a single-chip MOS-LSI communications device that provides two independent full-duplex asynchronous receiver/transmitter channels in a single package. It interfaces directly with microprocessors and may be used in a polled or interrupt driven system.

FEATURES

? Dual full-duplex asynchronous receiver/transmitter

? Quadruple buffered receiver data registers

? Programmable data format

– 5 to 8 data bits plus parity

– Odd, even, no parity or force parity

– 1, 1.5 or 2 stop bits programmable in 1/16-bit increments

? Programmable baud rate for each receiver and transmitter selectable from:

– 22 fixed rates: 50 to 115.2k baud

? 16-bit programmable Counter/Timer

– Non-standard rates to 115.2Kb

– One user-defined rate derived from programmable timer/counter

– External 1X or 16X clock

? Parity, framing, and overrun error detection

? False start bit detection

? Line break detection and generation

? Programmable channel mode

– Normal (full-duplex)

– Automatic echo

– Local loopback

– Remote loopback

? Multi-function programmable 16-bit counter/timer

? Multi-function 7-bit input port

– Can serve as clock or control inputs

– Change of state detection on four inputs

– 100k? typical pull-up resistor

? Multi-function 8-bit output port

– Individual bit set/reset capability

– Outputs can be programmed to be status/interrupt signals

? Versatile interrupt system

– Single interrupt output with eight maskable interrupting conditions

– Output port can be configured to provide a total of up to six separate wire-ORable interrupt outputs

? Maximum data transfer: 1X – 1MB/sec, 16X – 125kB/sec

? Automatic wake-up mode for multidrop applications

? Start-end break interrupt/status

? Detects break which originates in the middle of a character

? On-chip crystal oscillator

? Single +5V power supply

? Commercial and industrial temperature ranges available

? DIP and PLCC packages