SN012020中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Built-In SpeakerGuardTM Automatic Gain Control

(AGC) with Enhanced Battery Tracking

– Limits Battery Current Consumption

– Prevents Audio Clipping

? 2 W into 8 Ω Load From 3.6 V Supply (6 THD)

? Integrated Adaptive Boost Converter

– Increases Efficiency at Low Output Power

? Low Quiescent Current of 1.7 mA from 3.6 V

? Operates From 2.5 V to 5.2 V

? Thermal and Short-Circuit Protection with Auto

Recovery

? Three Gain Settings: 6 dB, 15.5 dB, and 20 dB

? Independent Control for Boost and Class-D

? Pin-to-Pin Compatible with TPA2013D1

? Available in 1.954 mm × 1.954 mm 16-ball DSBGA

Package

2 Applications

? Cell Phones, PDA, GPS

? Portable Electronics and Speakers

3 Description

The TPA2015D1 is a high efficiency Class-D audio

power amplifier with battery-tracking SpeakerGuard?

AGC technology and an integrated adaptive boost

converter that enhances efficiency at low output

power. It drives up to 2 W into an 8 Ω speaker (6

THD). With 85 typical efficiency, the TPA2015D1

helps extend battery life when playing audio.

The built-in boost converter generates a 5.5 V

supply voltage for the Class-D amplifier. This

provides a louder audio output than a stand-alone

amplifier directly connected to the battery. The

SpeakerGuardTM AGC adjusts the Class-D gain to

limit battery current and prevent heavy clipping.

The TPA2015D1 has an integrated low-pass filter to

improve the RF rejection and reduce DAC out-of-band

noise, increasing the signal to noise ratio (SNR).

The TPA2015D1 is available in a space saving 1.954

mm × 1.954 mm, 0.5 mm pitch DSBGA package

(YZH).