SN54SC8T595-SEP中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? VID TBD

? Radiation Tolerant:

– Single Event Latch-Up (SEL) immune up to 43

MeV-cm2/mg at 125°C

– Total Ionizing Does (TID) Radiation Lot

Acceptance Testing (RLAT) for every wafer lot

up to 30 krad(Si)

– Single Event Transient (SET) characterized up

to LET = 43 MeV-cm2/mg

? Wide operating range of 1.2V to 5.5V

? Single-supply voltage translator:

– Up translation:

? 1.2V to 1.8V

? 1.5V to 2.5V

? 1.8V to 3.3V

? 3.3V to 5.0V

– Down translation:

? 5.0V, 3.3V, 2.5V to 1.8V

? 5.0V, 3.3V to 2.5V

? 5.0V to 3.3V

? 5.5V tolerant input pins

? Supports standard pinouts

? Up to 150Mbps with 5V or 3.3V VCC

? Latch-up performance exceeds 250mA per JESD

17

? Space enhanced plastic:

– Controlled baseline

– Au bondwire and NiPdAu lead finish

– Meets NASA ASTM E595 outgassing

specification

– One fabrication, assembly, and test site

– Extended product life cycle

– Product traceability

2 Applications

? Enable or disable a digital signal

? Controlling an indicator LED

? Translation between communication modules and

system controllers

3 Description

The SN54SC8T595-SEP device contains an 8-bit,

serial-in, parallel-out shift register that feeds an 8-

bit D-type storage register. The storage register has

parallel 3-state outputs. Separate clocks are provided

for both the shift and storage register. The shift

register has a direct overriding clear ( SRCLR) input,

serial (SER) input, and a serial output (QH') for

cascading. When the output-enable ( OE) input is

high, the outputs are in a high-impedance state.

Internal register data is not impacted by the operation

of the OE input. The output level is referenced to the

supply voltage (VCC) and supports 1.8V, 2.5V, 3.3V,

and 5V CMOS levels.

The input is designed with a lower threshold circuit to

support up translation for lower voltage CMOS inputs

(for example, 1.2V input to 1.8V output or 1.8V input

to 3.3V output). In addition, the 5V tolerant input pins

enable down translation (for example, 3.3V to 2.5V

output).