SN74AVC2T45DCUT集成電路（IC）的轉(zhuǎn)換器電平移位器規(guī)格書PDF中文資料

1 Features

? Available in the Texas Instruments NanoFree?

Package

? VCC Isolation Feature: If Either VCC Input Is at

GND, Both Ports Are in the High-Impedance State

? Dual Supply Rail Design

? I/Os Are 4.6V Over Voltage Tolerant

? Ioff Supports Partial-Power-Down Mode Operation

? Max Data Rates

– 500Mbps (1.8V to 3.3V)

– 320Mbps (<1.8V to 3.3V )

– 320Mbps (Level-Shifting to 2.5V or 1.8V)

– 280Mbps (Level-Shifting to 1.5V)

– 240Mbps (Level-Shifting to 1.2V)

? Latch-Up Performance Exceeds 100mA Per JESD

78, Class II

? ESD Protection Exceeds JESD 22

2 Applications

? Smartphones

? Servers

? Desktop PCs and notebooks

? Other portable devices

3 Description

This 2-bit non-inverting bus transceiver uses two

separate configurable power-supply rails. The A ports

are designed to track VCCA and accepts any supply

voltage from 1.2V to 3.6V. The B ports are designed

to track VCCB and accepts any supply voltage from

1.2V to 3.6V. This allows for universal low-voltage

bidirectional translation and level-shifting between any

of the 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes.

The SN74AVC2T45 is designed for asynchronous

communication between two data buses. The logic

levels of the direction-control (DIR pin) input activate

either the B-port outputs or the A-port outputs. The

device transmits data from the A bus to the B bus

when the B-port outputs are activated and from the

B bus to the A bus when the A-port outputs are

activated. The input circuitry on both A and B ports

always is active and must have a logic HIGH or LOW

level applied to prevent excess leakage current on the

internal CMOS structure.