ST75C176B集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

ST75C176B屬于集成電路（IC）的驅動器接收器收發器。由意法半導體集團制造生產的ST75C176B驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Description

The ST75C176B/C is al low power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver.

This transceiver draw 300 mA (typ.) of supply current when unloaded or fully loaded with disabled drivers.

It operates from a single 5 V supply.

Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that placed the driver outputs into a high-impedance state. The receiver input has a fail safe feature that guarantees a logic-high output if the input is open circuit.

The ST75C176B/C is designed for bidirectional data communications on multipoint bus transmission line (half-duplex applications).

Features

■ Low quiescent current: 300 mA

■ Designed for RS-485 interface applications

■ -7 V to 12 V common mode input voltage range

■ Driver maintains high impedance in 3-state or with the power OFF

■ 70 mV typical input hysteresis

■ 30 ns propagation delays, 5 ns skew

■ Operate from a single 5 V supply

■ Current limiting and thermal shutdown for driver overload protection

■ Allows up to 32 transceivers on the bus

■ BiCMOS technology