STK672-110集成電路（IC）的電機(jī)驅(qū)動(dòng)器控制器規(guī)格書PDF中文資料

Overview

The STK672-110 is a unipolar fixed-current chopper type 2-phase stepping motor driver hybrid IC. It features power MOSFETs in the output stage and a built-in phase signal distribution IC. The incorporation of a phase distribution IC allows the STK672-110 to control the speed of the motor based on the frequency of an external input clock signal. It supports two types of excitation for motor control: 2-phase excitation and 1-2 phase excitation. It also provides a function for switching the motor direction.

Features

? The motor speed can be controlled by the frequency of

an external clock signal (the CLOCK pin signal).

? The excitation type is switched according to the state

(low or high) of the MODE pin. The mode is set to

2-phase or 1-2 phase excitation on the rising edge of the

clock signal.

? A motor direction switching pin (the CWB pin) is provided.

? All inputs are Schmitt inputs and 40-k?

(typical: –50 to +100) pull-up resistors are built in.

? The motor current can be set by changing the Vref pin

voltage. Since a 0.22-? current detection resistor is built

in, a current of 1 A is set for each 0.22 V of applied

voltage.

? The input frequency range for the clock signal used for

motor speed control is 0 to 25 kHz.

? Supply voltage ranges: VCC1 = 10 to 42 V, VCC2 = 5.0 V ±5

? This IC supports motor operating currents of up to 1.8 A

at Tc = 105°C, and of up to 2.65 A at Tc = 25°C.

Applications

? Two-phase stepping motor drive in send/receive

facsimile units

? Paper feed in copiers, industrial robots, and other

applications that require 2-phase stepping motor drive